Ruijie RG-S2910C-48GT2XS-HP-E

  • 48 x 10/100/1000BASE-T ports (PoE/PoE+),
  • 2 x 100/1000BASE-X SFP ports (combo),
  • 2 x 1G/10GBASE-X SFP+ ports (non-combo)

Açıklama

Ruijie RG-S2910C-48GT2XS-HP-E

Ruijie RG-S2910XS-E / P, üstün güvenlik için tasarlanmış yeni nesil Gigabit anahtarlardan oluşan bir koleksiyondur. Anahtar, engellemesiz / kablo hızında, yüksek performans ve olağanüstü enerji verimliliği sunar. Seri, tam Gigabit erişimi ve 10G performansı için benzersiz ölçeklenebilirlik sunar. Tamamen yeni donanım mimarisi ve Ruijie’nin en yeni RGOS11.X modüler işletim sistemi ile RG-S2910XS-E / P anahtarları, daha büyük masa kapasitesi, daha hızlı donanım işleme performansı ve öncekilerden daha iyi bir çalışma deneyimi sunar. Ek olarak, çeşitli özelliklerdeki PoE modelleri, PoE + üzerinde çalışan tüm aşağı bağlantı bağlantı noktalarını destekler ve 10G yukarı bağlantının yüksek bant genişliği talebini karşılar. RG-S2910XS-E / P anahtarları, yüksek yoğunluklu kullanıcı erişimini ve lider toplama performansını kolaylıkla garanti eder.

Öne Çıkan Özellikleri

  • 4 NeverDie Yüksek Güvenilirlik Teknolojisi: NFPP, XCor, VSU, XSurge
  • 67+ Yıla Kadar MTBF (Arızalar Arasındaki Ortalama Süre)
  • Ömür Boyu Ücretsiz Bulut Yönetimi
  • Yerleşik Katman 3 Yönlendirme Desteği
  • Güç Yedekliliği Desteği

Teknik Özellikleri

Model RG-S2910C-48GT2XS-HP-E
Ports 48 10/100/1000BASE-T ports (PoE/PoE+)
2 100/1000BASE-X SFP ports (combo)
2 1G/10GBASE-X SFP+ ports (non-combo)
Expansion Slots 2
Modular Power Slots 2
Fan Slots Fixed
Expansion Modules M2910-01XS
M2910-01XT
M2910-04XSÛ
Management Ports 1 console port
1 USB 2.0 port
Switching Capacity 264Gbps
Packet Forwarding Rate 132Mpps
Max. Number of 10GE Ports 4
PoE IEEE802.3af and 802.3at power supply standards; Automatic/energy-saving (default) power supply mode; Hot startup and uninterrupted power supply; Port priority; PoE devices support stacking
Port Buffer 1.5MB
RAM 512MB
ARP Table 1,000
MAC Address 16K
Routing Table Size 500 (IPv4/IPv6)
(IPv4/IPv6)
ACL Entries In: 1,500
Out: 500
VLAN 4K 802.1q VLANs, Port-based VLAN, MAC-based VLAN, Protocol-based VLAN, Private VLAN, Voice VLAN, QinQ, IP subnet-based VLAN, GVRP, Guest VLAN
QinQ Basic QinQ, Flexible QinQ, 1:1 VLAN switching, N:1 VLAN switching, 1:N VLAN switching
Link Aggregation AP, LACP (maximum 8 ports can be aggregated), Cross devices AP, Flow balance
Port Mirroring Many-to-one mirroring, One-to-many mirroring, Flow-based mirroring, Over devices mirroring, VLAN-based mirroring, VLAN-filtering mirroring, AP-port mirroring, RSPAN, ERSPAN
# RG-S2910-10GT2SFP-P-E supports N:1/1:N port mirroring, Flow-based mirroring
Spanning Tree Protocols IEEE802.1d STP, IEEE802.1w RSTP, Standard 802.1s MSTP, Port fast, BPDU filter, BPDU guard, TC guard, TC protection, ROOT guard,Spanning Tree Root Guard(STRG)
DHCP DHCP server, DHCP client, DHCP snooping, DHCP relay, IPv6 DHCP snooping, IPv6 DHCP client, IPv6 DHCP relay,DHCP Snooping Option 82
Multiple Spanning Tree Protocol (MSTP) Instances 64
Maximum Aggregation Port (AP) 128
SDN OpenFlow 1.0 & 1.3
VSU (Virtual Switch Unit) Support (up to 9 stack members,to ensure the effectiveness of the use, 4 members are recommended* ), Local and distant stacking, Cross-chassis link aggregation in the stack, Stacking via 10G Ethernet ports
# All models support the features above except RG-S2910-10GT2SFP-P-E
Zero Configuration CWMP(TR069)
L2 Features MAC, EEE, ARP, VLAN, Basic QinQ, Felix QinQ, Link aggregation, Mirroring, STP, RSTP, MSTP, Broadcast/Multicast/Unknown unicast storm control, IGMP v1/v2/v3 snooping, IPv6 MLD Snooping v1/v2,IGMP SGVL/IVGL, IGMP querier, IGMP filter, IGMP fast leave, DHCP, Jumbo frame, RLDP, LLDP, REUP, G.8032 ERPS, Layer 2 protocol tunnel
Layer 2 Protocols IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.1x, IEEE802.3ab, IEEE802.1Q (GVRP), IEEE802.1d, IEEE802.1w, IEEE802.1s
IPv4 Features Ping, Traceroute
IPv6 Features ICMPv6, IPv6 Ping, IPv6 Tracert, Manually configure local address, Automatically create local address
IPv4 Routing Protocols Static Routing, RIP, OSPF v1/v2
Basic IPv6 Protocols IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping and IPv6 Tracert
IPv6 Routing Protocols Static routing, RIPng, OSPF v3
G.8032 Support
ACL Standard/Extended/Expert ACL, Extended MAC ACL, ACL 80, IPv6 ACL, ACL logging, ACL counter, ACL remark, Global ACL, ACL redirect, Time-based ACL, Router ACL, VLAN ACL, Port-Based ACL
QoS 802.1p/DSCP/TOS traffic classification; Multiple queue scheduling mechanisms, such as SP, WRR, DRR, SP+WFQ, SP+WRR, SP+DRR; Input / output port-based speed limit; Port-based traffic recognition; Each port supports 8 queue priorities; flow-based rate limiting with the minimum granularity of 8Kbps,Dynamic QoS
Reliability VSU (virtualization technology for virtualizing multiple devices into 1); RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection Protocol); 1+1 power redundancy; Hot-swappable power module
EEE Format Support IEEE 802.3az standard
Security Binding of the IP address, MAC address, and port address; Binding of the IPv6, MAC address, and port address; Filter illegal MAC addresses; Port-based and MAC-based 802.1x; MAB; Portal and Portal 2.0 authentication; ARP-check; DAI; Restriction on the rate of ARP packets; Gateway anti-ARP spoofing; Broadcast suppression; Hierarchical management by administrators and password protection; RADIUS and TACACS+;Change of Authorization; AAA security authentication (IPv4/IPv6) in device login management; SSH and SSH V2.0; BPDU guard; IP source guard; CPP, NFPP; Port protection, CoA(RADIUS change of authorization),SCP (Secure Copy)Dynamic ARP Inspection(DAI)
Manageability SNMPv1/v2c/v3, CLI (Telnet / Console), RMON (1, 2, 3, 9), SSH, Syslog / Debug, NTP / SNTP, FTP, TFTP, Web, SFLOW,HTTP or HTTPS
# RG-S2910-10GT2SFP-P-E supports SNMPv2c, CLI (Telnet / Console), Syslog, RMON (1, 2, 3, 9), Web
Hot Patch Support
Smart Temperature Control Auto fan speed adjustment; Fan malfunction alerts; Fan status check
# All models support the features above except RG-S2910-10GT2SFP-P-E
Smart Power Supply Support power control and management
Other Protocols FTP, TFTP, DNS client, DNS static
Dimensions 440 × 360 × 44
(W x D x H)  (mm)
Rack Height 1RU
Weight 6.8kg (gross weight)
MTBF (hours)  >200K
Lightning Protection on Power Port Common Mode 4KV/Differential Mode 2K
Lightening Protection on Communication Port Common Mode 6KV
Power Supply AC power (RG-M5000E-AC500P):
Rated voltage range: 100V to 240V AC
Frequency: 50/60Hz
Rated current range: 7A to 3.5A
HVDC input:
Input voltage range: 192V to 290V DC
Input current range: 3.5A to 2.5A
DC power (RG-M5000E-DC500P):
Rated voltage range: -36V to -72V DC
Rated current: 16.5A
AC power (RG-RG-PA1150P-F):
Rated voltage range: 100V to 240V AC
Frequency: 50/60Hz
Rated current: 10A
HVDC input:
Input voltage range: 192V to 290V DC
Rated current range: 10A
Power Consumption 1700W (with 48-port PoE+)
PoE Power RG-M5000E-AC500P: 370W
RG-M5000E-DC500P: 370W
RG-PA1150P-F: 740W
Safety Standards IEC 60950-1, EN 60950-1
Emission Standards EN 300 386, EN 55022/55032, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
Temperature Operating temperature: 0°C to 50°C
Storage temperature: -40°C to 70°C
Humidity Operating humidity: 10% to 90%RH
Storage humidity: 5% to 95%RH
Operating Altitude -500m to 5,000m

Dökümantasyon

Veri Sayfası
Donanım Kurulum Kılavuzu
RGOS Yapılandırma Kılavuzu
RGOS Komut Referansı